![CL-2022-000676 - [2025] EWHC 2486 (Comm)](https://backend.juristeca.com/files/emisores/logo_WAai98v.png){kind=logo}
Sterility level: EN 556
Sterility level: EN 556
Here the relevant law at the time was provided by the EU Directives and regulations. For EU and UK purposes the relevant standard for sterility is EN 556-1: 2001. This provides that
“4.1 For a terminally-sterilized medical device to be designated “STERILE”, the theoretical probability of there being a viable micro-organism present on/in the device shall be equal to or less than 1 : 10-6…4.2 Compliance shall be shown by the manufacturer or supplier through provision of documentation and records which demonstrate that the devices have been subjected to a validated sterilization process fulfilling 4.1..
The documentation and records shall be retained as specified in EN ISO 13485:2000, 4.5 and 4.16 or EN ISO 13488:2000,”
- Heading
- This judgment was handed down by the court in person and by circulation to the parties’ representatives by email and released to The National Archives. The date and time for hand-down is deemed to be
- Sterility 101: An Introduction to sterility and Medical Device Law
- ISO 11137: Requirements of a Sterilisation Process
- Sterility level: EN 556
- Medical devices: MD Directive and MDR 2002
- Other relevant standards
- Summary
- Factual Background
- The PPE Cell
- The Recommendation
- The Essential Technical Requirements Document (“ETRD”)
- Precontractual Negotiations
- Closing
- Final Approval and Contract
- Manufacturing, delivery and inspection
- Rejection of the Gowns
- Testing of Gowns
- The Trial and issues
- The Contractual Claim
- The parties’ cases on construction
- The significance of the accepted obligation to deliver gowns with an SAL of 10 -6
- Was there breach of a requirement for a formally validated process in this case?
- Did the Contract require EN 556 or an Equivalent Technical Solution?
- Did the Contract require CE marking?
- The original case: Statistics, Physical Testing and Sterility
- Estoppel and related concepts
- Representation/assumption: clear?
- Approval of an ETS in place of EN 556
- Meeting the technical requirements/ No requirement to have a CE mark with an NB number
- Reliance
- Estoppel and validated process/SAL
- Non-Reliance and Entire Understanding Clauses
- Remedies
- Was the right to reject lost?
- Damages: The value of the Gowns and Mitigation
- Damages: The Claim for Storage Costs and Gown Disposal
- The Counterclaim
- Common mistake and rectification
- Negligent misstatement
- Conclusion
- Annex 1: Statistics, Physical testing and Sterility
- The testing
- Statistics
- The evidence and its implications
- The evidence gap
- Conclusion
- Annex 2: Relevant provisions of the Contract The Contract between DHSC and Medpro consists of a front page and several documents
- Order Form Section 5 of the Order Form “ The Supplier shall supply the deliverable described below on the terms set out in this Order Form and the Schedules and Annex A. Unless the Contract otherwise requires, c
- Section 7 of the Order Form is headed “Specification” and states: “The specification of the Deliverables is as set out in Annex A.1 – A.9 [26.06.2020]. Not as embedded/attached documents. Please confi
- Schedule 1
- Clause 2.2 of Schedule 1 states that the Order Form is to “ include, without limitation, the Authority’s requirements in the form of its specification and other statements and requirements, the Suppli
- Clause 3 of Schedule 1 is headed “ Quality assurance standards ” and states: “The following quality assurance standards shall apply, as appropriate, to the manufacture, supply, and/or installation of
- Conclusions